Headlines
Loading...
Turn Your Device as Hacking Machine | Install kali NetHunter && Advance

Turn Your Device as Hacking Machine | Install kali NetHunter && Advance


Turn Your Device as Hacking Machine | Install kali NetHunter && Advance


While the Android operating system has many advantages, it isn’t exactly a favorite of hackers and penetration testers. This is because the pre-installed tools are simply not enough for running all those pen-testing tools. And while installing a custom ROM does solve this problem, it might also void your warranty and compromise the integrity of your device in general. So what are your options? One option is to install Kali NetHunter, which is an Android app that lets you run Kali Linux on your mobile phone.



1. Introduction to Kali NetHunter


The Kali NetHunter is an Android penetration testing platform developed by Offensive Security. It allows you to perform security assessments on a set of Android devices without the need for further rooting or modification. The first hurdle is that you need a drawback-compatible phone that can run Kali Linux, the same way that all Android phones have to meet certain hardware requirements to run an “official” Linux version.
Once you have the suitable phone and firmware, installing Kali NetHunter is extremely straightforward. First, you have to install the NetHunter application from Google Play. The app is available in three flavors: free, premium, and pro. The free version allows you to run a limited number of tools and the pro version enables advanced pen-testing capabilities and access to the Kali NetHunter Forum community. Once the app has been installed and the wifi connection, you can fire up the NetHunter interface by using the shortcut: adb start NetHunter. Once plugged in, enter the NetHunter’s NetHunter root mode by entering the following command into the terminal: adb shell setprop to root. Once you gain root access, you can customize the NetHunter app by entering: setprop tweaks kali./netHunter/config/preferences.xml
Just like all other modern mobile Operating systems, Kali Linux comes with a plethora of tools, utilities, and modules built in for standard penetration testing usage. The Kali NetHunter is easier going through the pre-installed tools. Not because it lacks every useful tool or module in the market, but because to run all those tools, you need to install those pre-installed tools on your phone and download the NetHunter app.
The main reason for choosing Kali NetHunter over other Android penetration testing tools is the improvement in the security offered by the Linux OS. Many mobile phones shipping with Android 10 and above are not vulnerable to the majority of internet security flaws due to the additional security measures put in place by Google.



2. How to install Kali NetHunter on Android?


1. Download and install the latest version of TWRP Recovery on your Android phone. You can download it from the official website. 2. Download the latest version of NetHunter from the official website. Make sure you download the correct version for your Android OS version. 3. Download and install ADB and Fastboot on your computer. 4.Open the ADB and Fastboot folder on your computer. 5. Connect your Android phone to your computer with a USB cable. 6. To run NetHunter, launch the NetHunter folder on your computer.7. Open the command prompt by pressing the Windows key + R and entering $adb devices8. Type in the command engage|fw install /f /k x86_64 /q 9. Wait while the commands are executed, then you will see the installation completed on your screen. Tap on the SU icon to accept the license agreement. 10. Reboot your phone normally to complete the installation.
IMPORTANT! Make a backup of your recovery. img before you complete the installation. To do this, back up your recovery. img file using 10.2 Otg2WIF in a file manager like ES File Explorer on your PC. Then, install TWRP Recovery onto your Android phone before starting the NetHunter flashing process. In a Terminal window after you flashed the TWRP onto your phone, change directories to the NetHunter installing directory. Then format the Flash memory card.
Using TWRP Recovery on a modern computer, you should be able to see the installation completed on your screen. (That is if, you can see the flashing green LED.):
These lights will turn on when NetHunter has successfully installed. When you are all set and ready to go, reboot your device to boot into Android.
Unfortunately, both of us are running on an older version of Android, which does not have ECMA, which is the security mechanism that ensures that the running processes are allowed to run in the secure space.
As in previous versions of Kali Linux, you will have to start the installation of each tool manually.



3. How to use Kali NetHunter for pen-testing?


Kali Linux NetHunter is a very interesting project. It allows you to use your android device as a pen-testing environment. It consists of a custom android image that has been pre-configured for pen-testing. You can then use Kali Linux NetHunter to pentest wireless networks, crack WEP/WPA/WPA2 passwords, etc.
The main difference with NetHunter is that it is based on a QSPI framework. Thus, to maintain security, you must execute several extra steps before you can actually use the application.
Installation
How to install kali-tunnel-ng on your smartphone
Download NetHunter and open the file with a file explorer
If the file explorer doesn't open, then the proper file must be inserted into the file explorer
Once the file explorer opens, install the application
Once the application is installed, open the file browser and browse to the NetHunter folder
Navigate to the files Incoming.tar.gz
Drag and drop the Incoming.tar.gz file into Terminal on your android phone
And that’s it. You can now open NetHunter and use it to pentest easily. While NetHunter is still in its infant stages, it has done a good job so far. For example, it can already handle several common wireless network attacks such as Denial of Service (DoS) attacks, brute-force attacks (exploits), and it has decent battery life, too.
As you can see in the above screenshot, NetHunter can attack our network at a low configuration, making it a great tool for learning the ropes.
As you can see here, NetHunter can attack our network at low configuration - obtaining credentials at a Deep Packet Detector, and automatically changing the password to “admin.” To see this in action, you need to set a payload. In fact, we decided to use the “knockdown” attack to secure our target. By default, NetHunter won’t allow attacking other devices on the same network. Fortunately, several exploits allow for this.



Conclusion: In this article, you will learn about the utility of Kali NetHunter along with installation and usage guidelines. As a penetration tester, you can enjoy all the benefits of using Kali Linux on your Android mobile phones.


Kali Linux, the most popular open-source penetration testing Linux distribution, has always been a favorite among security researchers and security enthusiasts. It is based on Debian Linux, and its current version is Kali Linux 2.0 codenamed “Rolling”. Kali Linux is used to carry out various penetration testing activities on various systems and network devices. The mobile application allows the digital forensics and security analyst to get all the latest information about a connected device, including the process and calls of the operating system. In essence, it is well-suited for pentesting Android phones.
NetHunter comes pre-installed on Amazon Fire devices (that means if you purchased one of these devices, there’s a good chance that its Fire OS is already configured to allow NetHunter installation). This means that all you need to be aware of are the two things you need to do to put your Fire phone into NetHunter mode:
All we need to do now is download NetHunter from the Google Play Store and run the Kali Linux drivers.
Once the installation process begins, ensure that NetHunter is listening to and recording devices on your network. Double-check that you don’t have any wifi-connected devices on your network that are not part of the experimental network (Feedly, for example, would fall into this category). Once you have confirmed that NetHunter is listening to all the devices on your network, we need to connect them to our PC.
In Kali Linux, NetHunter is commonly configured to start airodump-ng, an Airodump engine that supports device discovery and exploitation. But before running the Airodump engine, we need to make sure that the Broadcom firmware and the USB drivers are loaded into Kali.
To avoid any errors, ensure that your USB keyboard and/or mouse are plugged into your Fire phone. And finally, open NetHunter, click the connect button under NetHunter Properties, and then start airodump-ng. The results should be in the same window as you.
Congratulations! You can now take your Fire phone and run all the apps that you need it to run without any hassle.



4. How to run multiple apps in parallel using multiwindow mode on Android Oreo?


Have you ever wondered how to run apps in parallel in Android Oreo? Well, if you're running Android Oreo, you can use the new multiwindow feature to run two apps at the same time. Here's how: Tap the overview button on your device (the square button on the bottom right corner).
Tap the multiwindow icon. In the pop-up, swipe left or right to move one app out of the way, and tap the second to put it in the new place.
Alternatively, you can run both Google’s universal image editor, GIMP, and the Emperion Developer Empirix Visualoader (EDE) in the same window. You can split up these similarly to how you can split up split the screen in Android Oreo.
While new Android apps can run natively on Linux, this usually comes with some drawbacks such as a reduced app's performance in memory. As the gap between the two mobile operating systems gets smaller, this makes existing apps harder to run on ad-free devices. However, installing Kali NetHunter isn’t extremely difficult. So let’s begin.
Subscribe to iTablet on YouTube for everything iPad and iOS!
Download the Kali NetHunter app from the Google Play Store. Once downloaded, it will automatically register on your device.
To use NetHunter, you need to have NetHunter configured to start automatically when your phone is turned on. For this, open the NetHunter app, tap the settings cog that appears at the top, then tap the Auto Start button. Next, input the NetHunter IP address when asked for this detail.
Please head over to the official website to see if NetHunter is a good fit for your phone. Sadly, there are no modems or Bluetooth controllers and no native keyboard support at the moment. If you do find a native keyboard or modem, let me know!
Once NetHunter is installed, it’s now time to get Kali attached to your Galaxy S10 phone.

Securing Kali is quite easy thanks to its multi-factor authentication (MFA) capabilities. To use them, you enable the 3FA feature in NetHunter.

My name is Dipesh and I am a self-taught white hat hacker and a commerce graduate from Nepal, Currently working for some well-known Youtube.

1 comment

  1. Customer help is a vital service that any participant ought to be able to|be succesful of|have the flexibility to} entry if needed at any time day or night. Both online and cellular gamers can entry it 24/7, however apparently through stay chat solely. At one time, phone and e mail providers were additionally offered, however is not a|there is not any} indication that those choices are at present obtainable. If I select “Options” I can flip the sound and vibrate on or 파라오 카지노 off.

    ReplyDelete